Trojan Boat Forum

hi, I read that the 11 mt express international trojan is an animated hull, can you explain to me in which part of the hull is the balsa?

Trojan 11 lt express international where is there a windscreen nozzle pump?

hi, I need to know, if possible, the builders of the porthole 'mounted on the 11 mt Express International, 1987, for replacement or repair, having the need to restore the seals, mosquito nets and in some cases the closures.
  thank you

I have 2 Caterpillar 3208 diesel, as shown in the diagram, in front of the main tank, but in the engine room under the generator, there is a smaller tank with an inspection cap, above it there are 2 tubes with 2 taps, I believe is independent from the main tank, it can serve as a vase decanter? I do...

from that tank, loosening the pins of the inspection plug flowed gas oil, there are also two tubes perhaps one power generator the other the return.
refueling takes place only from the one point of embarkation for both engines and the generator, which can be connected via tubing to the main tank?

from that tank, loosening the pins of the inspection plug flowed gas oil, there are also two tubes perhaps one power generator the other the return.
refueling takes place only from the one point of embarkation for both engines and the generator, which can be connected via tubing to the

Hello everyone, trojan on my 11 mt international Express is mounted a single fuel tank of 350 gallons per center stern,
in the engine room you see another tank under the generator provided with inspection flange, can anyone tell me if the tank and one in the aft engine room is all one piece? thanks

Hello everyone, trojan on my 11 mt international Express is mounted a single fuel tank of 350 gallons per center stern,
in the engine room you see another tank under the generator provided with inspection flange, can anyone tell me if the tank and one in the aft engine room is all one piece? thanks

hello, I would like to know how much it costs to redo an engine caterpillar from you, here in Italy is a follia.grazie

is assumed to a simple loss, this is the reason for which it was discovered after 1 year. (collezionisti= exhaust manifold the engine in an attempt to get it started before the discovery, it was locked, but once emptied of water in the heads, was spun by hand easily.   Was not found water in the oi...

thanks, I saw the site, now I'll have to take the measure of the portholes. believe that you can only replace the locks using the old frames? coming back to your restoration can you tell me what was the cost without the cost of the engines? have attempted to address a similar experience. Unfortunate...

hi, congratulations for the work performed, really nice!
I have a trojan in Italy 11 mt Express International and looking at your photos of the work I noticed that you have the same my ports, know the brand and maybe know where they are available?
my came off the locks, those with the wheel. thanks

Hi, I'm owner of a Trojan 11 Express with mt from 435cv 3208 caterpillar engines, one engine was found in the water tested before disassembly have been taken off the collectors that were full of water which have been sent to checkout. now I ask you do you think considering there is no water in the o...

Hello, I have a Trojan 11 meter express 1987, who can tell me what is the model of Onan generator that is installed on board? the plate is illegible. Thanks

hi, I would like to know the type and model of the heat exchanger of the engine CAT 3208 425 hp, thanks