Search found 36 matches
- Fri Aug 04, 2017 9:56 pm
- Forum: Trojan Boats Forum
- Topic: Slow speed wander
- Replies: 13
- Views: 7468
Re: Slow speed wander
Hi Guys, I was back to my boat for a few days this past week. I did go and recheck a few things that were mentioned above. First off, I checked the alignment of the rudders with a straight edge and a large square. Both the rudder quadrant arms are toed in between 1 1/2' to 1 3/4" so this is alm...
- Thu Jul 27, 2017 11:03 am
- Forum: Trojan Boats Forum
- Topic: Slow speed wander
- Replies: 13
- Views: 7468
Re: Slow speed wander
Hi Mikeandanne, seems to be the same coming or going. Only thing different is with a following sea, and like all semi planing hulls it take a lot of wheel work to hold a straight course if you cant get up to speed. That I can live with. As I said in my reply above, I will be going back out the chann...
- Mon Jul 24, 2017 4:05 pm
- Forum: Trojan Boats Forum
- Topic: Slow speed wander
- Replies: 13
- Views: 7468
Re: Slow speed wander
Thanks for your replies guys. It's possible that Rikalan has a solution with the tabs, that one is down further than the other when in the fully up position. I will try and play with light taps on each tab next time out to see if things improve. Capt I believe the engines are in synch, I do have a d...
- Sun Jul 23, 2017 10:29 pm
- Forum: Trojan Boats Forum
- Topic: Slow speed wander
- Replies: 13
- Views: 7468
Slow speed wander
Hi guys. I have a 36' Tricabin, 1974, 280hp Chryslers. It's a great boat in all regards except one. We have to travel a few miles up a narrow channel to get out to open water. It's speed restricted and we usually travel along at 1600/1700 rpm which gives us a 7.kt cruise speed. At this speed it's li...
- Mon Sep 12, 2016 6:20 pm
- Forum: Trojan Boats Forum
- Topic: Aaron Bocknek -- 1960 to 2016
- Replies: 62
- Views: 49191
Re: Aaron Bocknek -- 1960 to 2016
by Oldtimer
Thank you Aaron for all your expertise and advice to all re Tri cabins. R.I.P.
Thank you Aaron for all your expertise and advice to all re Tri cabins. R.I.P.
- Wed Jan 07, 2015 3:23 pm
- Forum: Trojan Boats Forum
- Topic: 36' Tricabin Aft head
- Replies: 7
- Views: 5143
Re: 36' Tricabin Aft head
Thanks everyone for all your feedback. Now I have one more project to work on come the springtime, getting more storage in the aft head. (I bet the first mate has it all figured out already whats going in there too) Thanks again guys, I always try and check out the forum a couple times a week.Always...
- Tue Jan 06, 2015 6:07 pm
- Forum: Trojan Boats Forum
- Topic: 36' Tricabin Aft head
- Replies: 7
- Views: 5143
Re: 36' Tricabin Aft head
Hi blair, interested to read your reply. My 36 is a 1974, and the mirror does not open. It seems to be fastened to a teak plywood panel underneath the glass (pretty hefty pc of glass mirror too) by four mirror clips. Right now its just a dead area, & seems to me that it would be a pretty good st...
- Mon Jan 05, 2015 6:07 pm
- Forum: Trojan Boats Forum
- Topic: 36' Tricabin Aft head
- Replies: 7
- Views: 5143
36' Tricabin Aft head
http://s759.photobucket.com/user/captkev2/media/1974Trojan36TricabinOntario-30_zps28adf0e6.jpg.html?sort=3&o=0 Hi Guys, I have a 36' 1974 Tri Cabin, & have been busy the past year doing lots of upgrades. We have had our boat a full season now, and during that time, I have always been curious...
- Wed Dec 24, 2014 1:42 pm
- Forum: Trojan Boats Forum
- Topic: MERRY CHRISTMAS
- Replies: 21
- Views: 8308
Re: MERRY CHRISTMAS
MERRY CHRISTMAS EVERYONE...............
- Tue Aug 19, 2014 4:13 pm
- Forum: Trojan Boats Forum
- Topic: Fuel Tank Senders again
- Replies: 2
- Views: 2066
Re: Fuel Tank Senders again
Hi Dog House, my senders that I removed were the original 0 - 90 ohms that Trojan apparently installed. I did not know this when I was trying to do an ohms test, and just presumed that all tank senders were the 33 - 240 ohm type. You are the first guy that's told me the 90 ohm ones were standard. :o...
- Mon Aug 18, 2014 9:24 pm
- Forum: Trojan Boats Forum
- Topic: Fuel Tank Senders again
- Replies: 2
- Views: 2066
Fuel Tank Senders again
Hi Guys. I guess many of you have seen my previous posting asking about fuel tank senders. Well I finally bit the bullet and in stalled two new senders in my 74 Tri Cabin. I ordered Moeller senders along with new gauges from West. I had previously prepared the floor over each tank by cutting out a 1...
- Sun Aug 10, 2014 4:06 pm
- Forum: Trojan Boats Forum
- Topic: Re WaxingHull ?
- Replies: 15
- Views: 7547
Re: Re WaxingHull ?
Hi Guys, I was away on a weeks vacation and am now back in the real world again. Thanks for your replies on this topic. Just thought I would throw this into the mix. Re the baby powder fix. We did buy a can of it and tried it on all the plywood seams that were noisy. It did work to a degree & cu...
- Tue Jul 29, 2014 6:12 pm
- Forum: Trojan Boats Forum
- Topic: Re WaxingHull ?
- Replies: 15
- Views: 7547
Re: Re WaxingHull ?
Hi Guys, thanks for all your great replies. Just thought I would say that I am away tomorrow morn and wont be back until Mon, Aug 4th. I will look forward to logging back in on the site then. Thanks
Oldtimer
Oldtimer
- Mon Jul 28, 2014 10:26 pm
- Forum: Trojan Boats Forum
- Topic: Re WaxingHull ?
- Replies: 15
- Views: 7547
Re: Re WaxingHull ?
Hi Guys, I neglected to say when I posted my query that when I bought my boat last fall, it had been polished and waxed by some company for the previous owner. Who or how I dont know. The hull and cabin have a nice semi gloss shine on them and I want to try and keep it up. So I just need to wax, no ...
- Mon Jul 28, 2014 7:22 pm
- Forum: Trojan Boats Forum
- Topic: Re WaxingHull ?
- Replies: 15
- Views: 7547
Re WaxingHull ?
Hey guys, any thoughts on waxing a hull ? Can anyone recommend a good wax. How about Starbrite, or Meguiars waxes , or ? Hard to pick one out with so many gosh darn waxes on the market, and they all make claim to being the best. Also, while I am on here, who has squeaky floors in their boat ? My Tri...