I found this oil filter adapter gasket set on Beacons's website.
https://www.trojanboats.net/zencart/ind ... cts_id=531
I'm assuming this is what I need. Can anyone confirm?
Search found 807 matches
- Fri Jul 19, 2019 4:54 pm
- Forum: Trojan Boats Forum
- Topic: Oil Filter Gasket Leak
- Replies: 9
- Views: 6805
- Fri Jul 19, 2019 4:49 pm
- Forum: Trojan Boats Forum
- Topic: Oil Filter Gasket Leak
- Replies: 9
- Views: 6805
Re: Oil Filter Gasket Leak
If its not the filter ,It also Could be the seal under the oil filter adapter . 2 types used. But hopefully a bad filter make sure the old filter seal came off I changed the oil and filter today. When I started the engine up oil was leaking from where the oil filter adapter meets the engine block. ...
- Mon Jul 15, 2019 9:16 pm
- Forum: Trojan Boats Forum
- Topic: Oil Filter Gasket Leak
- Replies: 9
- Views: 6805
Re: Oil Filter Gasket Leak
I purchased my Mobil M1-301A oil filter at Walmart today. I looked at several M1-301A filters on the shelf. Some of the rubber gaskets were much thinner than others. On one filter the rubber gasket was barely past the metal canister. The rubber gasket on the filter I chose extended significantly pas...
- Mon Jul 15, 2019 6:47 pm
- Forum: Trojan Boats Forum
- Topic: New start!
- Replies: 34
- Views: 19971
Re: New start!
Welcome back, PK! Glad to see progress is being made.
- Sun Jul 14, 2019 6:34 pm
- Forum: Trojan Boats Forum
- Topic: Oil Filter Gasket Leak
- Replies: 9
- Views: 6805
Oil Filter Gasket Leak
The oil filter gasket is leaking on my Chrysler LM318. I use Mobil M1-301A filters. I plan on changing the oil and filter this Saturday. Hopefully that will fix the leak. Is there anything I should be looking for when I change the oil filter? I know to make sure the old gasket is off and I clean the...
- Sun Jul 07, 2019 8:42 am
- Forum: Trojan Boats Forum
- Topic: Trojan F26 Express question
- Replies: 5
- Views: 5587
Re: Trojan F26 Express question
Did you look at the boat? What did you think?
- Thu Jul 04, 2019 10:22 am
- Forum: Trojan Boats Forum
- Topic: Happy Birthday America
- Replies: 4
- Views: 3300
Re: Happy Birthday America
Yes we are lucky! I'm going out for a boat ride this afternoon. Perfect weather to celebrate!
- Wed Jul 03, 2019 4:15 pm
- Forum: Trojan Boats Forum
- Topic: Trojan F26 Express question
- Replies: 5
- Views: 5587
Re: Trojan F26 Express question
The Trojan F26 has 5 degrees of deadrise. Most ocean going boats have 18 to 21 degrees of deadrise. With a relatively flat bottom the F26 is not designed for rough water. I wouldn't use an F26 on plane in waves that are more than 2 feet, but if you are off plane at displacement speed you can probabl...
- Sat Jun 29, 2019 2:10 pm
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
I installed the new pump today and everything is running great. I'm glad I got that taken care of!
- Fri Jun 28, 2019 7:56 pm
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
The new Sherwood D60 pump is painted and the pulley is installed. I could not get it to pump water spinning it by hand, but when I put water in the top it does not run through it. The water fills up the top outlet and overflows. I think that's a good sign. I'm installing the pump tomorrow and if eve...
- Mon Jun 24, 2019 10:12 pm
- Forum: Trojan Boats Forum
- Topic: ☀️NEW AND EXCITED PLEASE HELP! 73 Trojan
- Replies: 4
- Views: 3281
Re: ☀️NEW AND EXCITED PLEASE HELP! 73 Trojan
Nice looking boat. My boat would shake at higher rpms until I had my propeller reconditioned. If the propeller is not true it can generate a lot of vibration once you start increasing the rpms.
- Mon Jun 24, 2019 7:18 am
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
After doing further research I decided to paint the pump. Bronze does not corrode when exposed to oxygen but it will corrode when exposed to chlorides such as salt water. Because of this I'll paint the bronze to protect it.
- Sat Jun 22, 2019 7:08 am
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
What exact problems are you having ? The pump impellers are spinning but no suction is being created. My water intake was completely clogged by sticks, leaves, etc. and the pump hasn't worked since. I shut the engine down as soon as I saw the temperature rising but I think the blockage of the water...
- Sat Jun 22, 2019 7:03 am
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
I ordered a Sherwood D60 water pump. The Sherwood D60 has the same external dimensions as my current pump but with improved internal seals, bearings, etc. I'll install it next weekend. The Sherwood D60 is made of bronze. I am planning to install the pump unpainted. Is there a reason I should paint i...
- Fri Jun 21, 2019 12:05 pm
- Forum: Trojan Boats Forum
- Topic: Sherwood Double Pocket Pump Cams
- Replies: 11
- Views: 5577
Re: Sherwood Double Pocket Pump Cams
I replaced the cams and put in new impellers. When I attach a hose to the inlet side of the pump, put the hose in a bucket of water, and spin the pump by hand I can't get it to pump any water. When I put water in the outlet (top) side of the pump the water runs through the pump and out the inlet sid...