Trojan Boat Forum

Any thoughts on time and difficulty (scale 1 to 10) on replacing a rudder on an F32. Anything I should be aware of. Thanks for the info.

Take out the chalk material. I used west systems epoxy. I really don't think it matters what you use to secure the plugs as much as it matters to secure the base and a little of the lower portion. Make sure the size or depth of the plug will sit proud of the depth of the location. Tap it in gently t...

Have you checked with Beacon, they advertise them on the For Sale site.

Your Teak is badly discolored, ie. weather worn. Had a similar problem. Took the piece to a refinishing place and had them power plane a 1/64 of the underside and a 1/32 of the top side, followed by complete sanding with 100, 150 and 200 grip paper. you could cote with epoxy. I did not, just 5 coats...

You want get it thru the locks!

LandVF36, The Eemax EMT25 Point-Of-Use Mini Tanks Tankless Water Heaters Electric is a 2.5 gallon unit and is rated at 15 amps, this is the one I was looking at. Thanks for your input.

LandVF36, good point I will certainly keep that in mind during my search.

Anybody have any experience with these items, seams there are a number of manufacturers with various sizes. Really only need for doing dishes and basic morning chores.

This sounds like a possible solution to my need for a new Hot Water Heater/Tank for my 76 F32. Do we have an idea as to the cost.

My 76 F32 needs a new tank. I remember seeing a review that suggested these can still be purchased in the U.S. Can anyone provide some details.

Thanks Ken

That's the one, six per side.
thanks

Found a second one on the manifold at the rear, so 3 per side.

Thanks Ken

Any one know how many and where are they located, been told there is 5 only found two.

Thanks Ken

What is it you need to do. Interior, exterior swim platform all could use a different treatment.

With the screw ups at Pride Marine - Lagoon City, I am not even in the water, and can't get a commitment as to when in the next 10 days. Some how they can't seam to launch 10 boats a day. They started May 2nd, and we ain't closed to finished :oops: :twisted: :roll: But they talk a good word, sorry n...