Trojan Boat Forum

Everything is still available, we just need people to step forward with some sort of financial (commitment, what's it worth to me) for the parts they want.

It was intended as a project boat, not enough time to put in the effort.
What windshield, I need Starboard. Do you need wiper arms or blades.

Need info call 905 839 2610.
Ken

Have you called Seaward. I'm looking for the stove door, as are others whhich they don't have. We are looking at parting an F32 that has a princess in it, could be your ticket.

Where are you! Welcome aboard!

Stripermann2 and Diverted Income, Can you guys PM me and let me know what you might be interested in. I have been in touch with Boat lover and am trying to pull all this together.
Thanks Ken
If you prefer call 905 839 2610 or email kenneth.n.smith@bell.net

Diverted, I have a 76 and need some parts, is it possible to part this one. If you want to talk, my number is 905 839 2610 after 5;00 pm est.
Thanks Ken

Mine is the same setup, was also very tight. Needed to wrap the filter in a rag because the strap wrench kept slipping due to the tightness. If worse comes to worse drive a screwdriver through it. You will need some sort of tray and or plastic liner under the filter. It is upside down and will leak ...

Let's never forget or forgive, Life cannot be replaced!

How are you measuring speed!

Contact our host. Beacon Marine

Not an answer I can provide! Is food for thought, we will know soon. Thanks

As it turns out my upper gauge is faulty, when disconnected the lower gauge now reads in the forty range at idle. Will be getting a new gauge for upper station.

It appears our tank is half full of solid waste. We have a round fiberglass tank that I would suggest is about 15 to 20 gallons. However we get to flush about 10 times and we are full again. Is there some way to desolve old material in the tank. We used to use raw liver in the septic system at home,...

Mike, thanks for your thoughts. Answer is I don't know, very little run time since we purchased boat and did not pay much attention to this issue. But were learning!

The 80+ is my concern, when I start the engine pressure reads about 60 and the goes off the end within a minute, will try to switch starboard to port as suggested, but currently not at the boat until this sunday.