Trojan Boat Forum

holy hannah! According to my manua,l my mercruisers do 51 gallons/hr at wot!

well i tried to find some online, unfortunately they don't just sell DIY material without "professional" installation if you phone a roofing contractor they will probably sell it to you or try a local roofing store, there is also this stuff http://www.deckmastercanada.ca/index.html same t...

actually it is pretty simple to install, the biggest hurdle is to fill and sand all the seams/ knots so they do not telegraph through the membrane. After that it is as simple as applying contact cement to the bottom of the membrane and the wood, let dry and then lay it in place. As to how it holds u...

I know this may be out there but this is what I am using on the rear deck of my 36 trifly, currently I am using a similer product untill I am ready for the final install... http://www.duradeknorthwest.com/LearnDuradek/LearnDuradek.html it is non slip, waterproof and comes on a variety of colours, it...

We have the same boat, I got mine when the po had dropped them in, but not assembled. The bed sides were removed and the pOrt side of the floor of the rear deck, straight lift from there

if it only backfires AFTER warming up it sounds like a fuel issue, too lean can cause backfiring and the only thing that changes between a cold engine and a hot engine is the fuel mixture. Timing, spark and such remain the same (coil can breakdown I guess but causing a backfire?) With the choke on i...

Torcan, What about Zebra mussels? Shhhh... no one mentioned Zebra Mussels. But.. I haven't got any of them either !!! Not a single one, guess it is because of the new bottomkote I put on before launch. Could also be because the Ministry of the Environment seeds around our Basin to kill off the weed...

ummm, is it a silverton?

it is called an anti-siphon valve and prevents fuel from siphoning into bilge if a lower fuel line should break. The fuel pump can draw fuel past it but not gravity. They can get sticky. It is a ball and light spring inside. Larry is correct. It is mounted on top of the tank, and looks like a regul...

Michael seems cool but......no skirt in his pic! Ilene has a cool list of fellowships. Holy crap! Dr Herman is wild 15 published papers and an impressive list of honours/awards....thing is, I think I have socks that are older than him! lol Amy...Amy......Amy just to show I am not being sexist, how a...

umm just a question, Aaron posts pics of his boat y'know sorta like things that are important to him.....so inquiring minds want to know why he doesn't post pics of his medical team?

been searching the forum and elsewhere online, and no one really addresses why the original is perforated. I would imagine ventilation, but I just picked up marine vinyl for 5 bucks a running yard! The admiral has been looking online and has read non perf is no big deal. there is a 1/2 inch space so...

thanks for the suggestions, when the raw water pump was changed, the dealer sold me an entire new housing, said it was a wise decision so I did. When I backflushed the system it seemed pretty free, also when I was assembling the engines I cleaned out the manifolds. I will let you all know how things...

the engine is carb'd and the thermostat is a 143 deg I had a mechanic come down last week and run the ir gun this time as the admiral is getting impatient and I figure two of us can get this done quicker, he took a few readings to be sure. I can ask him where he took the readings, I was busy driving...

welcome to the forum! Although we are a cool bunch here (cept for torcan lol) I would go to edit and delete your #,you never know what trolls are lurking online... only give you # via pm we can all find you that way or via email

Dave