Trojan Boat Forum

Breakers are should be right to left or left to right. 1.Stove 2.Water heater 3. Starboard outlets 4. Port outlets We have the electrical drawing for your F-32 just give us a call. 609 713 4602 Note: Trojan electrical drawing are specific to a Trojan Boats hull number. Depending on what X package we...

It is intentional that the generator battery is not connected to the battery charger. The reason the battery charger is not connected to the generator battery is because Trojan wanted the generator to be isolated. So there was no way a failed battery charger could discharge the generator battery. Ma...

Here are two pages from the 1974 Catalog.
If you buy her we have the owners manual.

If you E mail us at Trojanboatsnet@aol.com we can E mail you a Video taken a few months ago of a F-32 321 on plane at 3800 RPM’s It is a impressive video of a 321 running stock props 16 x 15 super cup NI with Crusader 350’s

Infront of the door to head/shower pull carpet back and there is a floor panel remove it and the pump should be visible. You may need to unscrew the panel.

(Under floor near water tank center)

Beacon Marine sells all the Boat Leveler / Instatrim parts
as well as any part for any Trojan. Our prices would match what you would pay buying direct from Instatrim.

Beacon Marine
609 713 4602
Trojanboats.net

Ever wonder what the box was for by the exhaust on Trojan Internations with 671’s ? Johnson & Towers made Trojan add the box to a lot of the Internationals. 10.8, 11, 13, 14 They did this because another boat not a Trojan had a engine blow up because water got into engine through exhaust port. T...

Autopilot for Chain drive steering with Saginaw gear. We were ask to find a Autopilot for a owner of a Trojan F-32 model 320 with chain drive steering. After talking to a dozen company’s here is the best option we have found for a chain drive ( non hydraulic Steering) We found that the best option i...

We regularly get ask how to check the oil level in the Trojan with a Velvet Drive. How to check fluid leave in your BW trans. "Let the trans/ engine get to operating temp, then have someone ready by the dipstick, shut the motor down, and have that person immediately pull the dipstick clean it t...

Note: Balsa core and foam board core material is generally in 1” squares or rectangles and available in standard sizes 1/2” 3/4” and 1”. The thickness of the product you use for coring is important. Generally on soft spot repairs the top piece of 1/4” fiberglass decking is removed and new core mater...

There is also

Airex Boat Structural PVC Foam C70.75 | C70 42 x 24 x 1/2 Inch Green

About $50 for 2’ x 4’

This is 1” squares like the balsa core.

We have used this when replacing the balsa core in a soft spot on a hull ( not a Trojan)

We would use a micro filler to make the resin into a glue or paste. You Do Not want to fill the Tricel with resin. Then we would glue the Tricel to the bottom sheet of fiberglass and the top sheet of fiberglass. This is very basic instructions. Please feel free to call us Bob Beacon Marine Trojanboa...

Photos of Tricel

Here is a good number for the Tricel board
Vacuum Systems Co.
207 725 0935

Pricing 2’ x 4’ sheet

1/2 $13.30
3/4 $18.66
1” $22.50

Yes you are correct MPH

Good to have conformation of this old data.

Thank you