Trojan Boat Forum

http

disreguard

sorry wrong site

ok I got some pics up , the one pics of the cabin bilge area is what I was inquiring about you will see three sections on the cabin floor that when completed by trojan you wouldnt have access to now with the new wood should I leave access holes to get these areas ? have to excuse the facebook pics p...

no it all looks original , the screws are all petina covered and brass. I plan on bringing the old pieces back in the boat tomorrow night and get some pics. I do have the hardwood "ledges" like you had mentioned. actually throughout the whole boat they used these hardwood blocking , ledges...

not sure if I should keep posting but boat is a 1979f26 now... I started to trace out all the plywood that was inside the entire cabin area and had real good luck as the existing plywood was mostly in tack and could be traced a few I can work with but the question is this. It looks like Trojan used ...

nice bilge room there, I would however have eating off your floor once the engines were pulled by the looks of your pic. I think I could open an oil refinerly AND a toxic dump from I'm looking at in mine will have the pics up by end of week

Ok its the end of the day and as you see today got the better of me , I expected to walk down into the cabin and have it gleeming and shiny in one day. well after realizing it AINT happening Ive come to terms that its going to be done one square foot at a time with a brush and elbow grease/alot of e...

ok borrowed a pressure washer got in there and started to blast it , it was fully shopvacumed before and took out just about everything in the cabin minus the ceiling it was in perfect shape , well before I started pressure washing that is , once it started whatever it was on the hull bottom was bla...

well its a hot wsunny day and a great day to be on the boat. Sadly I'm on the boat and on the hard!!! I just finished removing all of the plywood inside the cabin on my 1979 f26 and have left only the three plywood stringer forms and am now trying to no avail to clean the inside hull and bilge area....

what is that panel below the steering wheel? are those the switches that control everything lights,horn . pumps ect?

was surfing and found this one for sale. looks like he's done a pretty detailed overhaul here http://cgi.ebay.com/ebaymotors/ws/eBayI ... tem=#v4-45

believe mine to be hydrolic steering. I asked a fella this am and he said possibly at the main wheel, the one that doesnt work there is a cap at the collum he said remove it and make sure fluid is in there , he said the fluid can be transmission fluid ? or possibly an air bubble in the line ? make a...

I might have asked this one before but not sure I had any responses. How does the steering system work on the f26 with flybridge? the flybridge wheel works,it moves the rudder. the cockpit main wheel does not do anything what should I be checking for basics on the cause? is there a lever/switch that...

snail boat / rag bag Well theres a first Ive heard alot but never those two now dont hold this against me as I own a hunter 23.5 waterballast "snailboat" sailed for a few years and now selling it to fund the engine rebuild on my trojan 26 .