72 F-31 props/shafts/cutless

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
RiverRatEd
Registered user
Posts: 4
Joined: Mon Jun 03, 2019 2:31 pm

72 F-31 props/shafts/cutless

Post by RiverRatEd » Mon Jun 03, 2019 2:48 pm

Does anyone have any info on size/length of my propshafts, cutless bearing and props used? I think I have an issue with my port side and want to attempt ordering parts before having it pulled.

Thanks!

RiverRatEd
Registered user
Posts: 4
Joined: Mon Jun 03, 2019 2:31 pm

Re: 72 F-31 props/shafts/cutless

Post by RiverRatEd » Mon Jun 03, 2019 2:48 pm

It has twin 318's, hardtop

BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 195
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Re: 72 F-31 props/shafts/cutless

Post by BeaconMarineBob » Mon Jun 03, 2019 8:31 pm

Best to give us a call.

We have the cutless bearing and may have the shaft, rudder and strut.

Bob
Beacon Marine
609 713 4602
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~

BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 195
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Re: 72 F-31 props/shafts/cutless

Post by BeaconMarineBob » Mon Jun 03, 2019 8:39 pm

Look for you Hull Number
Attachments
4B6C13D0-4DAD-4386-9DC6-2BE20AC099B8.jpeg
4B6C13D0-4DAD-4386-9DC6-2BE20AC099B8.jpeg (153.23 KiB) Viewed 873 times
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~

RiverRatEd
Registered user
Posts: 4
Joined: Mon Jun 03, 2019 2:31 pm

Re: 72 F-31 props/shafts/cutless

Post by RiverRatEd » Tue Jun 04, 2019 12:12 am

I need to find that tag, title says 3122093.

Thanks Bob

RiverRatEd
Registered user
Posts: 4
Joined: Mon Jun 03, 2019 2:31 pm

Re: 72 F-31 props/shafts/cutless

Post by RiverRatEd » Wed Jun 19, 2019 5:33 am

For future reference for anyone else in the same situation. I have 1 inch shafts. Stock 318's and they are 57 inches long. Cutlass is 4 inches long 1 1/4 wide.

72 F31

Ed

Post Reply