flybridge project

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
trojanmanXSagain
Registered user
Posts: 58
Joined: Thu Jul 25, 2013 5:50 pm

flybridge project

Post by trojanmanXSagain »

attempting to make a pivot point on the hardtop above the fly bridge to avoid having to recruit help twice a year to remove and reinstall it .
now take your bets and start shooting holes in the idea so I can overcome it before it rears its ugly head and makes a small problem bigger.

Buddys will be here in an jour to start will get some video back on here when and if it works .

http://www.youtube.com/watch?v=IDXPat4r ... e=youtu.be
trojanmanXSagain
Registered user
Posts: 58
Joined: Thu Jul 25, 2013 5:50 pm

Re: flybridge project

Post by trojanmanXSagain »

ok well it took awhile but it worked ! , we had to tweak it a bit after the video as we didn't take into consideration the angle on the fly bridge coaming. It was slightly angled so to fix it we just loosened the bolt on the pivot pin this allowe us to lean it all the way back without any problems.

http://www.youtube.com/watch?v=IDXPat4r ... e=youtu.be
trojanmanXSagain
Registered user
Posts: 58
Joined: Thu Jul 25, 2013 5:50 pm

Re: flybridge project

Post by trojanmanXSagain »

Post Reply