F28 props
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
F28 props
Does any f28 owner know for sure what props they have for twin 318s, and if so what WOT rpms are you getting.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
- ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
Re: F28 props
Can't Bob tell you the original spec? You have been trying to find this out for a long time and it seems we don't have any active F28 owners to help you.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
Re: F28 props
Actually I had called a couple of times, but just now tried again and he is going to find out for me. The reason I asked again was an f28 owner was just on the site and hoped he might know, but did not want to hijack his post.
Thx
L
Thx
L
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
Re: F28 props
Hi guys
Been a long time since i popped in. When we bought our F28 about 5 years ago, we had a problem getting up to top speed, and I think I found then that the original specs was for 14x10's. We had 14x10's with super cup, and that was too much pitch, so we had it taken out completely (as well as cleaning the bottom and learning to use the trim) and we can get about 4000 rpm out of 'er at top speed.
Hope that helps?
Been a long time since i popped in. When we bought our F28 about 5 years ago, we had a problem getting up to top speed, and I think I found then that the original specs was for 14x10's. We had 14x10's with super cup, and that was too much pitch, so we had it taken out completely (as well as cleaning the bottom and learning to use the trim) and we can get about 4000 rpm out of 'er at top speed.
Hope that helps?
F-28 1976
twin 318 Chrysler
twin 318 Chrysler
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
Re: F28 props
Thanks I have my second set at now at 14/9 and cupped so maybe we will get there also, bottom is clean. Thanks for letting me know.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
Re: F28 props
Don't shoot me for resurrecting an ancient thread. I have been reading thru the previous threads pretty deep to get all the info I can. The reading has been educational and entertaining. Thanks to all that contribute and pass on there knowledge and experience!
Larry, I was wondering how the 14/9's are doing now that you've probably had them on awhile. Did they get you the performance you were looking for, or did you change them again?
Larry, I was wondering how the 14/9's are doing now that you've probably had them on awhile. Did they get you the performance you were looking for, or did you change them again?
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
Re: F28 props
Well sorry I have not had the boat out of the water to swap for the 14/9s. Once I do will change out and post here, not sure when that will be.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
Re: F28 props
Oh I see, well if you get to a point and need a hand I am not too far away in Mesquite/Sunnyvale. I think you know the previous owner of my F28, he is TexasTrojanF28 on here.
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
Re: F28 props
Hi Lance,
Did you get that "pirate wheel to work" for your boys.
I will probably have the marina do it as they have a hoist and would be very difficult, not impossible, but very difficult to do it in water.
Larry
Did you get that "pirate wheel to work" for your boys.
I will probably have the marina do it as they have a hoist and would be very difficult, not impossible, but very difficult to do it in water.
Larry
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
Re: F28 props
Larry,
I actually bought the boat from him about a month ago but I have to say the wheel is working fine. He mentioned replacing it and told me he had a few parts from your salvage boat. In fact I picked up the exhaust manifolds and risers from him last week.
I actually bought the boat from him about a month ago but I have to say the wheel is working fine. He mentioned replacing it and told me he had a few parts from your salvage boat. In fact I picked up the exhaust manifolds and risers from him last week.