Homemade Davits
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
Homemade Davits
I made these davits out of PVC lumber from HD at a cost of $125.00 had to buy a router so it was another $110.00 The PVC lumber can be glued together just like pipe. I reenforced the bottom of them with 1/4 harden aluminum flat bar put two pcs. in for a total of 1/2. The brackets are 1/4" harden aluminum angle. I'll zinc them then paint with Bright sides to match the boat. They're 48" long and 3" wide I tried to bend them and couldn't. Also tested some extra that I glued with a 5lb hammer...I lost.
https://www.facebook.com/photo.php?fbid ... =1&theater
if the facebook didn't work try this
http://s852.beta.photobucket.com/user/t ... ary/Davits
https://www.facebook.com/photo.php?fbid ... =1&theater
if the facebook didn't work try this
http://s852.beta.photobucket.com/user/t ... ary/Davits
Last edited by alexander38 on Wed Jan 16, 2013 4:06 am, edited 2 times in total.
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
- prowlersfish
- 2024 Gold Support
- Posts: 12697
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
- Stripermann2
- Ultimate User
- Posts: 3027
- Joined: Fri Jan 19, 2007 9:11 am
- Location: Solomon's Island, MD
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
Thanks guys, now on to the tabs...
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
-
- Moderate User
- Posts: 737
- Joined: Tue Nov 17, 2009 10:52 pm
- Location: Ft Lauderdale Fl
They look nice but I'll be honest, I have no idea where they go or how they work. Are they davits or cradles that go on the swim platform. I think I might have missed a earlier post about this project.
Doug
1977 F-32
1982 Chris Craft 280
1992 Boston Whaler 13 Super Sport Limited
1974 F-25 (Sold)
1979 F-26 (sold)
1977 F-32
1982 Chris Craft 280
1992 Boston Whaler 13 Super Sport Limited
1974 F-25 (Sold)
1979 F-26 (sold)
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
[quote="summer storm"]They look nice but I'll be honest, I have no idea where they go or how they work. Are they davits or cradles that go on the swim platform. I think I might have missed a earlier post about this project.[/quote]
Cradles, They'll go on my swim platform. That project starts in a few days. I'm adding 18" to it.
Cradles, They'll go on my swim platform. That project starts in a few days. I'm adding 18" to it.
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
-
- Moderate User
- Posts: 737
- Joined: Tue Nov 17, 2009 10:52 pm
- Location: Ft Lauderdale Fl
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
I'll update as each project as it goes along, someone kept poking me to so I will
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
- Stripermann2
- Ultimate User
- Posts: 3027
- Joined: Fri Jan 19, 2007 9:11 am
- Location: Solomon's Island, MD
Sort of like a pig in a poke...?alexander38 wrote:I'll update as each project as it goes along, someone kept poking me to so I will
Jamie
1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...
-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...
-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
Here are a few manufacturers of that style. I've considered building them for myself. I might have to try now!
http://www.hurleymarine.com/Davit.html
http://trickdavit.com/
http://www.hurleymarine.com/Davit.html
http://trickdavit.com/
Mike & Cynthia
1990 10 Meter Mid-Cabin
Traverse City, MI
1990 10 Meter Mid-Cabin
Traverse City, MI
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
[quote="cmcmjk"]Here are a few manufacturers of that style. I've considered building them for myself. I might have to try now!
http://www.hurleymarine.com/Davit.html
http://trickdavit.com/[/quote]
Did them in two days, maybe 7 hrs of work total ...
Jamie....BITE ME...!
http://www.hurleymarine.com/Davit.html
http://trickdavit.com/[/quote]
Did them in two days, maybe 7 hrs of work total ...
Jamie....BITE ME...!
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
alexander38,
Did you find solid PVC lumber at Home Depot? Everything I have found here has been "celluar core". I was going to use Starboard HDPE sheet but it's much more expensive than what you used.
If you still have the receipt could you give me the SKU# (barcode#)?
Did you make the pivot brackets and do you have any advice there?
For what its worth, I was going to mount the pivots on arms that slide into a "receiver" type mount below our swim platform. This would give us the platform depth needed without extending the platform. We fish using downriggers so a larger platform would not work for us and the ability to remove everything to fish is a priority for us.
Thanks for any ino you can share.
Did you find solid PVC lumber at Home Depot? Everything I have found here has been "celluar core". I was going to use Starboard HDPE sheet but it's much more expensive than what you used.
If you still have the receipt could you give me the SKU# (barcode#)?
Did you make the pivot brackets and do you have any advice there?
For what its worth, I was going to mount the pivots on arms that slide into a "receiver" type mount below our swim platform. This would give us the platform depth needed without extending the platform. We fish using downriggers so a larger platform would not work for us and the ability to remove everything to fish is a priority for us.
Thanks for any ino you can share.
Mike & Cynthia
1990 10 Meter Mid-Cabin
Traverse City, MI
1990 10 Meter Mid-Cabin
Traverse City, MI
- ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
Tony,
What kind of hoist system are you going to use to get the dinghy onto the davits and then onto the platform? How are you going to set it up on your design of boat?
Comment: Having experienced the effort required using a Hurley davit on my F32, I quickly found the video of a pretty young thing lifting what must have been a very light RIB to be quite misleading.
What kind of hoist system are you going to use to get the dinghy onto the davits and then onto the platform? How are you going to set it up on your design of boat?
Comment: Having experienced the effort required using a Hurley davit on my F32, I quickly found the video of a pretty young thing lifting what must have been a very light RIB to be quite misleading.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL