Page 1 of 1
Propeller shaft.
Posted: Tue Jul 21, 2009 6:48 pm
by pk
Hi! I am in a need of a propeller shaft for my ´84 10 meter Express. Anyone who have one, maybe with a pair of props?
Posted: Tue Jul 21, 2009 8:03 pm
by prowlersfish
What size props are you looking for ?
Posted: Tue Jul 21, 2009 9:11 pm
by guglielmo6160
I have a spare prop shaft in my garage, not sure what size , but if you give me the particulars its yours if you canuse it
Posted: Thu Jul 23, 2009 2:48 pm
by pk
Hi Guys! Prop must be 19 x 18, and shaft is 1-1/4 diameter, and the length is 224 cm (metric). Any clue?
Posted: Thu Jul 23, 2009 5:54 pm
by rossjo
Don't know length, but F32's also use 1-1/4" shaft ...
Posted: Sat Jul 25, 2009 6:45 am
by RWS
In my 1983 Express Cruiser I was originally swinging 18x21 4 blade bronze props. Through testing we modified these to 18x19 which for her weight and condition was the most efficient.
The new in the box (at that time) spares that came with the boat were 17x22 Nibral
The factory shaft is 1.25"
RWS
Posted: Sun Jul 26, 2009 6:13 am
by pk
On the old propeller it´s printed in the center: "FAULKNER 9672", and on the opposite side there is "CP7058". Maybe this will help?
Posted: Sun Jul 26, 2009 7:55 am
by RWS
To the best of my knowledge, the Internationals with the 454 Crusader gas engines were fitted from the Lancaster factory with 1.25" diamater shafts.
RWS