Trim Tab Hose
Designed and manufactured exclusively for Trojan Boat Leveler. This trim tab hose is Rated at 2000 lb. burst pressure. Sold per foot -- Enter number of feet in Quantity ** Free shipping **
Trojan trim tab motor pump. This 12v motor pump can be used to replace the Trojan trim tab pumps in all single cylinder, 12v Insta-Trim systems. For use in both F-Boats or International. This pump unit comes with a housing, reservoir, motor, pump, solenoids and brass hose fittings and 2 stainless steel hose clamps (already assembled). This allows for easy installation
Trojan Seat and Back (fabric)
For folding wood captain chair. When installed over the frame seat is 18" wide and back is 16" wide. Giving a 3" pocket on each side for the back supports and 2" on each side for the side support. Size : Seat 22L x 15.75W - Back 22L X 6.5W - Made of heavy boat canvas ** Free shipping **
Morris Handle - Black
Modified TeleFlex handle to fit Morris Control - We recommend buying in pairs so that both handles match (price shown is for a single handle). If you are unsure if your control is a TeleFlex or Morris control please call, text or email us and we will help you identify your control.
Morris Handle - Red
Modified TeleFlex handle to fit Morris Control. We recommend buying in pairs so that both handles match (price shown is for a single handle). If you are unsure if your control is a TeleFlex or Morris control please call, text or email us and we will help you identify your control.
Chrome plated 1 7/8" fuel fill cap
All Trojan used one of two different fuel fill caps this is the Chrome Plated Bronze for a 1 7/8" fill. The other was a solid stainless steel cap. The stainless steel fill cap has a back which is solid not like this cap which is hollow. If you need a fuel cap and the back is hollow like this cap this is the one you need.
Fuel cap for F-series Trojans (Used)
This cap is Chrome Plated Bronze. There were 2 types of fuel caps used on the F boats: Chrome Plated Bronze and Cast Stainless Steel. The Chrome Plated Bronze has an open back (not solid back)
Snap Caps for Interior Finishing
Colors: Red, Burgundy, Tan, Off white, Silver, Light blue, Dark blue, Dark brown, Light brown, Light green ** Sold in bags of 10 ** FREE SHIPPING ** Indicate color at checkout
Trojan Chain Deck Pipe *New*
Stainless steel -- Dimensions: 6.25" x 4.5" - outside dimension -- Hole size is 4.25" by 2.25" -- Excellent replacement if the hole needs to be made larger due to soft balsa wood. Or can be used as a less expensive replacement for the original cast Trojan chain Deck Pipe ** One available **
Curtain Rod / Slide Track
Plastic slide track -- Have 32 feet -- (sold per foot basis) -- (Enter # of feet needed in Qty) -- Free shipping in the US -- Longest length 8’ ** Just the curtain rod - NO Eyelets ** (FREE SHIPPING IN US)
Groco SV-1250 Valve (Reconditioned)
$135.00 includes shipping -- There is a $50.00 core charge. When a complete and serviceable core is returned we will refund your $50.00 core charge. ** MUST call to Order **
Call to order
Note new photo
This goes under both International and F Boats.
Trojan F-25, F-26 Rudder Port
This rudder port was used on F-25 or F-26 with a rudder which has the cavitation plate as part of rudder. On other F-25 and F-26 Trojans the cavitation plate was bolted under the transom and takes a different rudder port. Condition: Used like new. Ready to install. **Only one left -- Part no longer available**
Trojan Plexiglass Windscreens
We can make plexiglass windscreens for any F32, F36 and F40. Full sets or just one plexiglass section. For other Trojans we can fabricate wind screens from the old screens. Prices start around a $990.00 for a full set of three windscreens. Shipping and boxing extra. Local pickup available in PA zip 17582. Call for pricing