Beacon Marine Supply


Trojan Boats -- Parts -- Forum

Home




F-Boat - Vents



Page: 1

Blower Cover - (double) -- 178.68


Blower Cover - (double / down)
For all F-Series Trojans

Blower Cover - (port) -- 128.69


Blower Cover - (port)
For all F-Series boats

Blower Cover - (single) -- 104.10


Blower Cover - (single / down)
For all F-Series Trojans

Blower Cover - (starboard) -- 128.69


Blower Cover - (starboard)
For all F-Series boats

Side Vent - Chrome -- 46.79


Trojan International // Late model F32 - F36 -- Side vents - 17" 1/2 X 3" 1/2 outside - 16" X 2" 1/4 inside - Chrome Plastic

Side Vent - Off-White -- 28.43


Trojan International and late model F32 / F36 -- Side vents -- 17 1/2 " x 3 1/2" outside -- 16" x 2 1/4 inside -- Off white -- Plastic

Side Water Diverter Box -- 173.16


Water diverter box for 10M MidCabin
There was a design flaw in the side vent on the 10M MidCabin. There was no provision for diverting the rain or wash down water out of the vent. This has caused water damage to the fuel tank as well as the stringers. This diverter box fixes this problem and has the vent holes at the top and is angled to let all water run out the Louvered vent. Questions or more photos please contact us at 609 713 4602 -- Louvered vent sold separately in Off-White or Chrome. ** Diverter boxes are sold as a pair **


Trojan Vent - (painted)


Trojan Vent
Call to Order -- 8" x 17" vents - Used on F32 and F36 and all 36' and 42' before 1970 - Inside - 16 5/8" x 7 7/8" - Outside - 8 3/8" x 17 1/2" - Comes primed with zinc chromate and painted gloss white

Trojan Vents - (unpainted) -- 190.00


Trojan Vent
8 3/4" by 17 1/2" outside -- Used on F32, F36, F40, F42 through 1981 and some wooden Trojans before 1970. Inside - 16 5/8" by 7 7/8" -- Outside - 8 3/4" x 17 1/2" -- Comes ready to prime and paint.

ABS 5 Slot Vent -- 12.14


This ABS 5 slot vent is a nice, inexpensive replacement for the S/S original Trojan vent. Fits later model F-25, F-26, F-27, F-30, F-31, and F-36 Tri-Cabin. ** Will not Fit F-30 model 308 ** - Cut out 3 5/8" x 12 1/8" - Overall 4 3/4" x 13 1/4" - ** Always check the cut out size before ordering **



Page: 2

Vents for F-Series -- 57.87


Vents for F-Series (late model)
Fits F-25, F-26, F-27, F-30, F-31 and F-36 Tri-Cabin. ** Will not fit F-30 (model 308) ** 12.75" x 4.375" Outside // 11.75" x 3.5" Inside - Stainless Steel 5 Louver

Side Vents -- S/S -- 54.89


Early F-25 and F-26 side vents
5 louvers - 11 3/8" x 4 3/8" outside - 10 3/8" x 3 1/4 inside - Stainless steel

Trojan Information
Ask questions via the:
Contact Us Form





International Series
TrojanBoat.com