Page 1 of 1
Air/Heat Units
Posted: Sat Jan 30, 2010 9:57 am
by Charlie Schroeder
I have a 10.8 International. Trying to locate the drain lines for both front and back units. The back unit in under the fly bridge console and when I run the rear unit it drips from the ceiling vents in the cabin. I also would like to eliminate the draining into the bilge.
Please help
Posted: Sat Jan 30, 2010 12:06 pm
by MTP
where would you like it to drain into? The bilge seems to me the best place
a/c drain
Posted: Sat Jan 30, 2010 7:12 pm
by Bill R
hy my name is bill I have a 10 meter fly bridge . the salon a/c drain may be pluged take down the cover that holds the 3 vents look for the drain hose not the freon hoses the hose runs on the back side of the air handler let me no how you make out Bill
Posted: Sat Jan 30, 2010 9:34 pm
by alexander38
run them in to a attwood bilge/head drain box then pump it over the side,
Posted: Sun Jan 31, 2010 4:43 am
by AndyF32
If you really don't want the condensation to go into the bilge you can use one of these "
http://www.mmair.com/marine_division/ac ... ondensator" it sends the condensation overboard with the seawater.
Posted: Sun Jan 31, 2010 7:27 am
by Rodman
Andy Leave the " Out next time your link will work. Or even better put a space before and after the link and then you can use ".
