Trojan Boat Forum

1989 11 Meter Express HACV control panel located in galley doesn't work.(so I'm told) Can this be repaired or even replaced by passed?? Knowing that parts for Trojans only are scarce to say the least what would do if you needed one??

Thanking you in advance.

P.S. We are getting very close

Trojan did not make the control . Most likely it is a cruse-air and you should have no problem getting a replacement. It should have the name on it .

is it the 3 knob controls ? I got some your neck of the woods this yr. I'll get the name of the Co. and post it today, they sold them one part at a time (each pc.) or the whole thing.

before i would spend any money on the old 3 knob i would consider a digital control. set it on the temp you want and done. the 3 knob you have to guess at the temp and mine was all over the place, wifes too hot then to cold, digital is the only way to go.
i've reposted from one my earlier ones


heres what i put on my f32 last year and has worked perfect took about 15 minutes to wire/install simple simple. prices may be different but should still be in the ballpark
here a picture you can see it installed in my boat



here is a copy of my post

PostPosted: Sun Dec 16, 2007 11:57 am Post subject: fx 1 Reply with quote Edit/Delete this post
here you go

i replaced my rotary 3 knob contols with this micro air fx-1 retro fit kit
distributor was AER, piece of cake to install.
heres a link to microair

http://www.microair.net/

click products and go to fx-1 retrofit you can see pic of display and also download the manual.

AER prices/parts needed for retro total $336.30

Part Number: ASY370X02
Description: Power Logic box w/Circuit Board
Net Price Each: $ 148.13

Part Number: ASY390X01
Description: FX1 Display Vertical Black
Net Price Each: $ 164.42

Part Number: SUB031X15
Description: Display Cable 15’
Net Price Each: $ 11.25

Part Number: SUB056X07
Description: Air/Water Sensing Cable 7’
Net Price Each: $ 12.50

+1 on the FX-1.
Very easy to install and it does so much more than the 3 knob unit.... and the customer support is first class!

Thanks guys. That makes sense Trojan didn't make the part. I'll check the name. That fx-1 sounds like a good idea as well.

Thanks g36........ we were just wondering this weekend if we could replace our 3 knob with a digital. The temp was all over the place.
Ron

your welcome rbcool

if you have questions or if i can be of help please let me know