Trojan Boat Forum

Finally back in town to get back on my boat projects. The 1973 F30 Clean Machine we recently purchased currently has no side windows. PO made covers out of starboard and it seems to work and look ok. Inside they covered the window frames with similar covering. I have located a set of side windows that came out of a 1977 Trojan but have no idea of what the actual original side window size of F30 is without taking apart what the PO fabricated. That would create quite a bit of a mess which I wouldn't mind if the replacements are a close fit.

Can anyone give me any measurements before I have to take this mess apart? I know there is different measurements for inside frame and outside frame. I would hate to miss this opportunity, if they fit it will be amazing!

Thanks

Did the windows you got come out of a Clean Machine ? I don't think any other F series boat window would fit, and if they are from a Clean Machine, you're going to want to take all that starboard off to inspect the original tracks. Odds are thay are all rotted. When I did all mine I believe they were around 10' long (at bottom) and 16 or 18" high??

If you get the measurements you can always have a glass shop fabricate some for you at a decent price, my old silverton had a replacement set done and 8 windows cost me a total of 200 for them to cut me out a new set.

I have no window frames currently. Everything was removed inside and out by PO and covered. What I found is a set of side windows with frames and glass. Outside frame is 97.5" long x 10" tall and inside frame is 93" long x 8.25" tall, sure hope it could work it would be a great deal.

oo well thats a bit of a different story then, i thought it was just the glass that was missing

I took a piece of it apart and it seems the windows and frames are going to be too small anyway. Bummer! You are right Lawman those are good size windows!

Just as well because I really was not ready to take on that project right now anyhow.

Thanks to all.