Search found 12667 matches
- Tue Apr 09, 2024 6:15 pm
- Forum: Trojan Boats Forum
- Topic: old gauges
- Replies: 16
- Views: 8520
Re: old gauges
Joe, That tach is not original. The hour meter is digital. They did not have digital back then and the OEM tachs were also cable-driven. A new hour meter will be at zero. The OEM would likely say trojan on them. Not sure who made them. Any photos of the other gauges so I can tell you if they are OEM...
- Sat Apr 06, 2024 7:54 am
- Forum: Trojan Boats Forum
- Topic: 1974 Trojan F25 soft spots
- Replies: 1
- Views: 655
Re: 1974 Trojan F25 soft spots
It is possible but it is much better and easier done from the top. I had the same issue and rather than cut it open, I used a product called injectadeck. I was happy withe the results. Here is a link to the thread on my repair https://www.trojanboats.net/wforum/viewtopic.php?p=111878&hilit=injec...
- Sat Apr 06, 2024 7:46 am
- Forum: Trojan Boats Forum
- Topic: New to the group & Trojans Buying an 11M Express
- Replies: 1
- Views: 644
Re: New to the group & Trojans Buying an 11M Express
Congrats and good luck. Make sure the inspection is really a Survey done by a NAMS or a SAMS-accredited surveyor. At 2 years it is time to paint the bottom again. Hope all goes well.
- Tue Apr 02, 2024 5:53 am
- Forum: Trojan Boats Forum
- Topic: 89 mid cabin alternator and belt size
- Replies: 3
- Views: 610
Re: 89 mid cabin alternator and belt size
Any photo of your Alt? Beacon Marine has some
https://www.trojanboats.net/zencart/ind ... th=102_110
https://www.trojanboats.net/zencart/ind ... th=102_110
- Sun Mar 31, 2024 11:09 am
- Forum: Trojan Boats Forum
- Topic: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
- Replies: 4
- Views: 669
Re: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
Not 100% on what you are looking for. But you can plan on about 1 MPG on plane and maybe 2 MPG below hull speed ( 7 knots or so) While not exact it should be in the ballpark and will vary some on the exact speed, weather conditions, and of course the boat's condition.
- Fri Mar 29, 2024 9:51 pm
- Forum: Trojan Boats Forum
- Topic: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
- Replies: 4
- Views: 669
Re: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
You can compare an automotive engine to a marine engine with many differences. Like cams, ignition advance curves to start. starboard engine even turns in the opposite direction than the port.
- Fri Mar 29, 2024 7:51 pm
- Forum: Trojan Boats Forum
- Topic: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
- Replies: 4
- Views: 669
Re: 1971 Trojan F31 Hardtop - Twin 1971 Chrysler 318's
The 318 is rated at 225hp. Trojan info shows 4000 as top rpm. And it is propped that way. I can try and look up the specs for a new 1971 F31, but it is unlikely an old boat would come close.
- Sat Mar 09, 2024 6:49 pm
- Forum: Trojan Boats Forum
- Topic: 1988 10 Meter-mid cabin Rudder Bushings
- Replies: 1
- Views: 1158
Re: 1988 10 Meter-mid cabin Rudder Bushings
Nice work and good info.
- Fri Mar 08, 2024 12:04 am
- Forum: Trojan Boats Forum
- Topic: 1988 10 Meter-mid cabin, Need new propellers!
- Replies: 11
- Views: 9371
Re: 1988 10 Meter-mid cabin, Need new propellers!
I always preferred 3 blades for performance.
- Fri Mar 01, 2024 7:51 am
- Forum: Trojan Boats Forum
- Topic: 1988 10 Meter-mid cabin, Need new propellers!
- Replies: 11
- Views: 9371
Re: 1988 10 Meter-mid cabin, Need new propellers!
You definitely should be faster than what you are. The old props in poor condition are surely a factor. Look forward to the results. I expect a positive report.
- Wed Feb 28, 2024 9:25 am
- Forum: Trojan Boats Forum
- Topic: 1988 10 Meter-mid cabin, Need new propellers!
- Replies: 11
- Views: 9371
Re: 1988 10 Meter-mid cabin, Need new propellers!
Nice, I have heard a lot of good things about their propellers. I have a friend who runs them and swears by them. Did you change the diameter or pitch at all? Looking forward to hearing how they do. I'm also jealous.
- Sat Feb 10, 2024 4:36 pm
- Forum: Trojan Boats Forum
- Topic: Answering a question about a Carver 370/390
- Replies: 35
- Views: 26090
Re: Answering a question about a Carver 370/390
Great Info Rick
- Wed Jan 31, 2024 9:28 am
- Forum: Trojan Boats Forum
- Topic: Does anyone have information?
- Replies: 1
- Views: 1420
Re: Does anyone have information?
The hose is 1 3/4" Beacon carries parts for these including elbow and mufflers.
- Fri Jan 05, 2024 9:31 am
- Forum: Trojan Boats Forum
- Topic: Trojan 13 Meter - shipping height
- Replies: 4
- Views: 7306
Re: Trojan 13 Meter - shipping height
Bob. said the cradle was about 8" off the hard. Remember the height will vary on the trailer used. 13'4" was the height in the cradle.
- Wed Jan 03, 2024 10:24 pm
- Forum: Trojan Boats Forum
- Topic: Trojan 13 Meter - shipping height
- Replies: 4
- Views: 7306
Re: Trojan 13 Meter - shipping height
Try contacting Bob at Beacon Marine. But trojan specs maybe with the cradle